ASTM E2274-16 under the specific conditions of the BPR: 2018 Guidance. Standard test Method for evaluation of laundry sanitizers and disinfectants: Bactericidal, Fungicidal, mycobactericidal and virucidal activity*.

Test accredited by ENAC (National Accreditation Entity), except for activity against viruses*

The BPR: 2018 Guidance states that the test described by the ASTM E2274-16 Standard can be used for the evaluation of PT2 products. Biocides can be used to treat textiles and fabrics in hospitals, health care facilities, industry, institutions or private homes, when relevant micro-organisms in the textiles have to be reduced. These products can be in the form of laundry products which combine detergent and biocide or can be specialized products in the form of laundry additives which are added to the wash cycle or as finishing products (e.g. fabric softeners) which are added in the last rinsing step or as pre-treatment.

               The method described by the ASTM E2274 is designed to evaluate the disinfectants or sanitary products of laundries used in automatic washing processes using volumes of usual wash water, applied to demonstrate the reduction or complete death of a bacterial population in tissues and wash water after a single wash. This method is designed for tests with vegetative bacteria but can be adapted for tests with fungi or viruses. The method simulates the washing conditions, for which a set of tissues inoculated with the microorganisms is placed in a volume of the solution of the evaluated product, in the proportion indicated by the manufacturer, and shaken. After a period of contact time, the washing water, the neutralizing liquid, and the tissue used, are individually grown in a quantitative manner (cleaning efficiency), or qualitatively (disinfecting efficacy).

               According to the BPR Guidance, textile disinfection products must be at least sufficiently effective against bacteria and yeasts. For the other groups of organisms (fungicidal, virucidal and mycobactericidal activity), the corresponding tests should only be provided when activity against them is claimed. Test microorganisms according to the BPR Guidance for PT2 products are indicated in the following table:

Claim

PT2 Products

Bactericidal activity

Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli (for domestic area and industry) y Escherichia coli K12 (for medical area).

When disinfection is done at high temperatures (>40 ºC), the test should be performed only with Enterococcus faecium.

Yeasticidal activity

Candida albicans.

Fungicidal activity

Candida albicans and Aspergillus brasiliensis.

Micobactericidal/ tuberculocidal activity

Micobactericidal activity: Mycobacterium terrae and Mycobacterium avium.

Tuberculocidal activity: Mycobacterium terrae.

Virucidal activity*

(Test not accredited)

Poliovirus tipo1, Adenovirus tipo 5 and Murine Norovirus.

When disinfection is done at high temperatures (>40 ºC), the test should be performed only with Murine Parvovirus.

               According to the BPR Guidance, the interfering substance most appropriate for the in-use conditions should be used. For instance, blood for products used in the medical area and protein for products used in industry, institutional and domestic areas are recommended.

               The soiling on a domestic product for use in pre-soak (dirty clothes) will be very much higher than the soiling present for a post-wash rinse additive (clean clothes). For products used during pre-soak and wash, tests should be done under dirty conditions. For products used during post-wash rinse, tests should be done under clean conditions.

               The interfering substances indicated by the BPR Guidance for PT2 in medical area PT2 are 0.3 g/L bovine albumin (clean conditions) and 3 g/L bovine albumin + 3 mL/L erythrocytes (dirty conditions). For other uses, such as industry, institutions and domestic area, the recommended interfering substances are 0.3 g/L bovine albumin (clean conditions) and 3 g/L bovine albumin (dirty conditions).

               In this assay, six pieces of tissue are used for each microorganism. Three pieces for the test product and 3 pieces for the controls. These inoculated pieces are inserted between the folds of a 15 g piece of cloth and maintained inside the closed exposure chamber under agitation for the time specified by the manufacturer. Once the exposure time has elapsed, the supports and the inoculated pieces of tissue are removed and introduced into a neutralization broth. The filtrate of the neutralization broth, the neutralization broth itself and dilutions prepared therefrom, are cultivated to detect the presence of the inoculated microorganisms, as well as their reduction, if any, expressed in log10. Duplicate validations of the microorganism count controls are included in the test. The counting of the surviving microorganisms after the washing simulation process is carried out by means of quantitative counts in duplicate, with 5 dilutions in base 10.

To be considered effective against the different microorganisms, the product must demonstrate a logarithmic reduction of 4 in the number of viable bacteria, and mycobacteria, and a logarithmic reduction of 3 for yeasts and fungi. The Guidance does not establish acceptance criteria for the test with viruses.

Cost of tests with the microorganism indicated by the BPR: 2018 guidance:

  • Basic price with the five bacteria indicated by the guidance (Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli and Escherichia coli K12): Consult to ivami@ivami.com.
  • Basic price with the four bacteria indicated by the guidance, depending on the intended area (Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli): Consult to ivami@ivami.com.
  • Basic price with one of the three bacteria indicated by the guideline (Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli and Escherichia coli K12): Consult to ivami@ivami.com.
  • Basic price for fungicidal activity (Aspergillus brasiliensis and Candida albicans): Consult to ivami@ivami.com.
  • Basic price for yeasticidal activity (Candida albicans): Consult to ivami@ivami.com. 

Cost of other options (not accredited by ENAC*)

  • Basic price for virucidal activity with one of the virus indicated by the BPR guidanceConsult to ivami@ivami.com.