Instituto Valenciano de Microbiología

Masía El Romeral
Ctra. de Bétera a San Antonio Km. 0.3
46117 Bétera (Valencia)
Phone. 96 169 17 02
Fax 96 169 16 37
CIF B-96337217


Hemolysis test. UNE-EN 10993-4. Biological evaluation of medical devices: Selection of tests for interaction with blood, and ASTM F 756-93 method.

Test Accredited by ENAC (National Accreditation Entity).

Test with the Certificate of Good Laboratory Practices (GLPs).

There are several tests that determine the hemocompatibility of a product, investigating its ability to induce thrombosis, coagulation, platelet activation, or activation of other biological systems. The hemolysis test determines the ability of a product, or an extract obtained from it, to cause hemolysis, using rabbit blood or human blood, by spectrophotometrically measuring the absorbance of the extract to which the blood has been added, then to incubate at 37°C for 60 minutes, as well as the corresponding negative and positive controls. A percentage of hemolysis below 2% is considered non-hemolytic, considering the value of 100% for the total amount of hemoglobin present in the added erythrocytes.

In the direct contact hemolysis test, the product is placed in direct contact with a saline suspension of rabbit erythrocytes. The percentage of hemolysis induced by the biomaterial is determined by spectrophotometrically measuring the hemoglobin released from the erythrocytes.

In the hemolysis test with extracts, the product is subjected to extraction with physiological saline solution. A portion of the salt extract is added to a standard aliquot of rabbit erythrocytes, and mixed thoroughly. The percentage of hemolysis induced by the extract is determined by measuring the hemoglobin released from the erythrocytes by spectrometry.