Biocidal activities with disinfectants (160 accredited tests)

  1. AATCC 30: 2017e. Antifungal Activity, Assesment on Textile Materials: Mildew and Rot Resistance of Textile Materials.
  2. AATCC 100: 2019. Assessment of antimicrobial finishes on textile materials.
  3. AATCC 147-2011 (2016e). Test Method for Antibacterial Activity of Textile Materials: Parallel Streak
  4. AATCC 174-2011 (2016)e. Test Method for Antimicrobial Activity Assessment of New Carpets - AATCC 174-2011(2016) Standard.
  5. AOAC 960.09. Germicidal and detergent sanitation action of disinfectants.
  6. ASTM D3273-21. Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber.
  7. ASTM D4300-23. Standard test methods for ability of adhesive films to support or resist the growth of fungi.
  8. ASTM E1052-20. Standard test method to asses the activity microbicides against viruses in suspension.
  9. ASTM E1053-11. Standard Test Method for the efficacy of virucidal agents for innanimate environmental surfaces.
  10. ASTM E1115-11 (2017). Standard Test Method for Evaluation of Surgical Hand Scrub Formulations.
  11. ASTM E1153-22. Standard Test Method for Efficacy of sanitizers recommended for innanimate, hard, non-porous, non-food contact surfaces.
  12. ASTM E1173-15-Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations.
  13. ASTM E1174-21. Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations.
  14. ASTM E1327-07 (2018). Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions.
  15. ASTM E1838-17. Standard Test Method for Determining the virus-eliminating effectiveness of Hygienic Handwash and Handrub agents using the Fingerpads of adults.
  16. ASTM E1883-02 (2015). Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique.
  17. ASTM E2011-21. Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand
  18. ASTM E2111-12 (2018). Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals.
  19. ASTM E2149-20. Standard Test method for determining the antimicrobial activity of antimicrobial agents immobilized under dynamic contact conditions.
  20. ASTM E2180-18. Standard Test Method for determining the activity of incoporated antimicrobial agents in polymeric or hydrophobic materials.
  21. ASTM E2197-17e1. Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides.
  22. ASTM E2274-16 and BPR: 2023 Guidance. Standard test Method for evaluation of laundry sanitizers and disinfectants: Bactericidal, Fungicidal, mycobactericidal and virucidal activity.
  23. ASTM E2274-16. Standard method for evaluation of laundry sanitizers and disinfectants.
  24. ASTM E2275-14. Standard Practice For Evaluating Water-Miscible Metalworking Fluid Bioresistance And Antimicrobial Pesticide Performance.
  25. ASTM E2276-10 (2019). Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults.
  26. ASTM E2315-23-Assessment of Antimicrobial Activity Using a Time-Kill Procedure.
  27. ASTM E2362-22. Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection.
  28. ASTM E2406-16. Standard test method for evaluating of laundry sanitizers and disinfectants for use in high efficiency washing operations.
  29. ASTM E2613-14. Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults..
  30. ASTM E2614-15 (2020)e1. Disinfectant activity in cleanroom. Evaluation of cleanroom disinfectants.
  31. ASTM E2721-16. Evaluation of Effectiveness of Decontamination Procedures for Surfaces when Challenged with Droplets Containing Human Pathogenic Viruses.
  32. ASTM E2752-10 (2015). Standard Guide for Evaluation of residual Effectiveness of Antibacterial Personal Cleaning Products.
  33. ASTM E2755-22. Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Handrub Formulations Using Hands of Adults.
  34. ASTM E2783-22. Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure.
  35. ASTM E2784-10 (2015). Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination.
  36. ASTM E2799-22. Standard test method for testing disinfectant efficacy against Pseudomonas aeruginosa Biofilm using the MBEC assay.
  37. ASTM E2870-19. Handwashing using palmar surface and mechanical sampling. ASTM E2870–13. Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling.
  38. ASTM E2871-21. Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method.
  39. ASTM E2946-21. Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults.
  40. ASTM E3031-20. Standard Practice for Determination of Antibacterial Activity on Ceramic surfaces
  41. ASTM E3135-18. Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with simulated Soil.
  42. ASTM E3160-18. Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles.
  43. ASTM E3162-18. Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions.
  44. ASTM E3179-18. Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil.
  45. ASTM E652-91 (2009). Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects.
  46. ASTM E653-91 (2009). Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects.
  47. ASTM E645-18. Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems.
  48. ASTM E723-13 (2019). Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage).
  49. ASTM E875-20. Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry.
  50. ASTM F1608-21-Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method).
  51. ASTM G21-15 (2021)e1. Standard method to determine the resistance of synthetic polymeric materials to fungi.
  52. ASTM E2722-14. Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media-Cancelled by ASTM..
  53. DIN SPEC 10534: 2019-02. This standard has been withdrawn and replace by EN 17735: 2022 Standard (See EN 17735).
  54. EN 1499: 2013. Hygienic handwash (phase 2, step 2).
  55. EN 1500: 2013. Hygienic handrub. Test method and requirements (phase 2, step 2).
  56. EN 1650: 2019. Quantitative suspension test for evaluation of fungicidal activity in food, industrial, domestic and institutional areas (phase 2, step 1).
  57. EN 1657: 2016. Quantitative suspension test for evaluation of fungicidal or yeasticidal activity in the veterinary area (phase 2, step 1).
  58. EN 1040: 2006. Quantitative suspension test for the evaluation of the basic bactericidal activity of antiseptics and chemical disinfectants (phase 1).
  59. EN 1104: 2018. Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents.
  60. EN 1275: 2007. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics (phase 1).
  61. EN 1276: 2019. Quantitative suspension test for evaluation of bactericidal activity in food, industrial, domestic and institutional areas (phase 2, step 1).
  62. EN 1276: 2019 and BPR: 2023. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas (phase 2, step 1) under specific conditions for P
  63. EN 12791: 2016 + A1: 2018. Surgical hand disinfection (phase 2, step 2).
  64. EN 13610: 2003. Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas (phase 2, step 1).
  65. EN 13623: 2021. Bactericidal activity against Legionella pneumophila. EN 13623: 2021. Quantitative suspension test for evaluation of bactericidal activity against Legionella for aqueous systems (phase 2,step 1).
  66. EN 13623: 2021 and BPR: 2023. Bactericidal activity against Legionella under specific conditions for PT5 of BPR Guidance.
  67. EN 13624: 2021. Quantitative suspension test for evaluation of fungicidal or yeasticidal activity in the medical area (phase 2, step 1).
  68. EN 13697: 2015 + A1: 2019. Quantitative textile surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants - Test method without mechanical action (phase 2, step 2). In-house method based on the standard.
  69. EN 13697: 2015 + A1: 2019. Quantitative test for evaluation of bactericidal / fungicidal activity in food, industrial, domestic and institutional areas (phase 2, step 2).
  70. EN 13704: 2019. Quantitative suspension test for the evaluation of sporicidal activity in food, industry, domestic and institutional areas (fase2, step1).
  71. EN 13727: 2012 + A2: 2015. Quantitative suspension test for evaluation of bactericidal activity in the medical area (phase 2, step 1).
  72. EN 14204: 2013. Quantitative suspension test for evaluation of mycobactericidal activity in the veterinary area (phase 2, step 1).
  73. EN 14347: 2005. Basic sporicidal activity. Test method and requirements (phase 1, step 1).
  74. EN 14348: 2005. Quantitative suspension test for evaluation of mycobactericidal activity in the medical area including instrument disinfectants (phase 2, step 1).
  75. EN 14349: 2013. Quantitative test for the evaluation of bactericidal activity on non-porous surfaces without mechanical action (phase 2, step 2).
  76. EN 14476: 2013 + A2: 2019 and BPR: 2023 - Virucidal activity under the specific conditions for PT4 products.
  77. EN 14476: 2013 + A2: 2019. Quantitative suspension test for the evaluation of virucidal activity in the medical area (phase 2, step 1).
  78. EN 14476: 2013 + A2: 2019. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2, step 1) under specific conditions for PT5 of BPR.
  79. EN 14561: 2007. Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2).
  80. EN 14562: 2007. Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area (phase 2, step 2).
  81. EN 14563: 2009. Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area (phase 2, step 2).
  82. N 14675:2015. Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area (phase 2, step 1).
  83. EN 15457: 2022. Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi.
  84. EN 15458: 2022. Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae.
  85. EN 16437: 2014 + A1: 2020. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action (phase 2, step
  86. EN 16438: 2014. Quantitative surface test for the evaluation of fungicidal activity of chemical or yeasticidal disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action (phase 2, step 2).
  87. EN 1656: 2019. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area (phase 2, step 1).
  88. EN 16615: 2015. Quantitative test method for the evaluation of bactericidal and yeasticidal activity on non-porous surfaces with mechanical action in the medical area (4-field test) (phase 2, step 2).
  89. EN 16616: 2022. Chemical-thermal textile disinfection (phase 2, step 2).
  90. EN 16777: 2019. Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area (phase 2/step 2).
  91. EN 17111: 2018. Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area (phase 2, step 2).
  92. EN 17122: 2020. Quantitative non-porous surface test for the evaluation of viricidal activity of chemical disinfectants and antiseptics used in the veterinary area (phase 2, step 2).
  93. EN 17126: 2018. Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area (phase 2, step 1).
  94. EN 17272: 2020 and BPR: 2023. Methods of airborne room disinfection by automated process. Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities.
  95. EN 17387: 2021. Quantitative non-porous surface test for the evaluation of bactericidal and/or yeasticidal and/or fungicidal activity of chemical disinfectants used in medical area. Test method without mechanical action (phase 2, step
  96. EN 17422: 2022. Quantitative surface test for the evaluation of teat disinfectants in the veterinary area (phase 2, step 2).
  97. EN 17430: 2024. Hygienic handrub virucidal. (phase 2, step 2).
  98. EN 17658: 2022. Chemical textile disinfection for the domestic area. Test method and requirements (phase 2, step 2).
  99. EN 17735: 2022. Food hygiene - Commercial dishwashing - Hygiene requirements, testing.
  100. EN 17846: 2023. Quantitative test method for the evaluation of sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes in the medical area (4-field test) - Test method and requiremen
  101. EPA SOP No. MB-09-07. Disinfectant Towelette Test: Testing of Staphylococcus aureus, Pseudomonas aeruginosa, and Salmonella enterica).
  102. G39-011: 2009. Properties of textiles-Textiles and polymeric materials having anti-dust mite properties-Characterisation and measurement of anti-dustmite activity.
  103. INSECTS-Practical efficiency of insecticide products intended for the destruction of cockroaches in locals (premises) (CEB Method No. 159: 2012).
  104. INSECTS-Surface treatment or spray products against cockroaches (ECHA BPR Guide: 2023 for PT18 products). Non-choice laboratory test (based on CEB method Nº159: 2012). Simulated use test or choice test
  105. ISO 846: 2019. Plastics. Evaluation of the action of microorganisms.
  106. ISO 13125: 2013. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials.
  107. ISO 13629-2: 2014. Textiles-Determination of antifungal activity of textile products- Part 2: plate count method.
  108. ISO 15714: 2019. Method of evaluating the UV dose to airborne microorganisms or viruses transiting in-duct ultraviolet germicidal irradiation devices (UVGI).
  109. ISO 16869: 2008. Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations.
  110. ISO 17094: 2014. Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment.
  111. ISO 18061: 2014. Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials-Test method using bacteriophague Q-beta.
  112. ISO 18071: 2016. Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment - Test method using bacteriophague Q-beta.
  113. ISO 18184: 2019. Determination of antiviral activity of textile products.
  114. ISO 20645: 2005. Evaluation of antibacterial activity in textile tissues. Diffusion test on agar plate.
  115. ISO 20743: 2021. Textiles. Determination of antibacterial activity of textile products.
  116. ISO 21702: 2019. Measurement of antiviral activity on plastics and other non-porous surfaces.
  117. ISO 22196: 2011 and JIS Z 2801: 2010 + A: 2012. Antibacterial activity on plastics and other nonporous surfaces.
  118. ISO 22551: 2020. Fine ceramics - Determination of bacterial reduction rate by semiconducting photocatalytic materials under indoor lighting environment - Semi-dry method for estimating antibacterial activity on the actual environmental bacteria contami
  119. ISO 27447: 2019. Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for antibacterial activity of semiconducting photocatalytic materials.
  120. Microbiological examination of non-sterile products. Screening tests and microbiological counts (Eur. Pharm. 2.6.12 and Eur. Pharm. 2.6.13. Eur Pharmacopoeia 11).
  121. NF T72-281: 2014. Determination of bactericidal, fungicidal, yeasticidal, mycobactericidal, tuberculicidal, sporicidal and virucidal including bacteriophages-REPLACED by EN 17272: 2020. .
  122. OECD 170-4: 2012. Activity of disinfectants for swimming pools and SPAs with microorganisms and viruses.
  123. PAS 2424: 2014. Quantitative surface test for the evaluation of residual antimicrobial (bactericidal and/or yeasticidal) efficacy of liquid chemical disinfectancts on hard non-porous surfaces.
  124. Rodenticides: Evaluation assays.
  125. Serratia marcescens, Pseudomonas spp. and other bacteria contaminating antiseptic and disinfectant solutions: Detection by conventional cultures; Molecular detection (PCR); Identification (sequencing); Molecular epidemiological comparison by
  126. UBA: 2013-Quantitative determination of the efficacy effect of disinfectants that are introduced into water intended for drinking water production, or into drinking water in the distribution network. Bactericidal and virucidal activity (based on Umwelt